Feb 27, 2008
Monday Night Product Call Recap
MONDAY NIGHT PRODUCT
CALL RECAP
Certified Leadership Team Member, Susan Keast
Good afternoon to all the DWG Distributors that were unable to “attend” the Monday Night Product Conference Call. Over the past couple of weeks the calls have begun to really become more informative than ever before as more and more distributors are beginning to join in on this “Open Mike” forum. Most recently, Founder and C.E.O., Rod Yanke has been on these calls to go over very critical information on the products, especially the newly introduced ULTRA-ION™ GREEN.
We had an awesome call…everyone is so “spun up” about the NEW ULTRA-ION™ GREEN! Rolinda Harris welcomed all the participants to the call and said that tonight she wanted everyone to share how they had been using their new ULTRA-ION™ GREEN. Rolinda reminded everyone that Rod Yanke has given us the message and we are the messengers. It is up to us to get the word out about the worldwide water crisis and share our DRI WASH ‘n GUARD® water-saving products with everyone we meet.
The many excited DWG distributors on the call chimed in with what they had been doing with the new ULTRA-ION™ GREEN:
Andy and Eric Oot, New York - Glass, mirrors, tile and hardwood floors, television, plastic surfaces and stainless steel. “So easy to use, just wipe on and wipe off.”
Doug Evilsizer, Kansas City - Porcelain, figurines, counter tops, appliances, pet stains out of carpet and baked-on stains on a glass top stove. Doug said, “We just sprayed the product on the stain, let it soak a short time, and gently removed with a plain Mr. Clean Magic Eraser.”
Bob Seeman, Georgia - Said he had tried the new ULTRA-ION™ GREEN on his neighbor’s sliding glass door. “Their glass is a challenge to keep clean because they have a couple of large dogs who “slobber” on the window. Many of us know how hard THAT can be to remove.” Bob said not a problem with ULTRA-ION™ GREEN. He just sprayed the dirty area, let it sit a minute and wiped away. Bob’s neighbors are quite impressed.
Dennis Stafford, Nevada – He put the new ULTRA-ION™ GREEN to the test on his barbeque grill. He said he just sprayed the product on, worked it with a brush, and the grill came clean!
Guy and Susan Keast, Kansas - Used ULTRA-ION™ GREEN on their oven. They sprayed the product on the surface, let it set a minute, and noticed that the baked-on grease started “melting” away. Using a plain Mr. Clean Magic Eraser, they were able to easily remove the grease and grime, and wiped away the rest with a microfiber towel. What a clean oven! Guy and Susan also reported they had also tried ULTRA-ION™ GREEN to clean painted walls and woodwork. They had thought they might have to repaint, but after putting “GREEN” to the test and the fabulous job it did cleaning the surface, they have decided the walls can be cleaned much more easily than re-painted. This had been used on semi-gloss painted surfaces, and there was a question if the results would be the same with flat paint. California’s Pam Kruger said that she had cleaned walls painted with flat paint, and Bob Seeman cleaned cinder block walls painted with flat paint – both of them had excellent results!
Joe Egge, Minnesota - Put ULTRA-ION™ GREEN to the test in the bathroom. He tried it out on the mildew in the grout in his shower and said that it took out the rusty color that develops from his water-softening system as well as the mildew. Spray it on, work it around with a brush or your towel, and wipe away. He also put a capful in the water reservoir of the toilet, which removed the dark color that had built up. Guy and Susan Keast, Kansas, chimed in they had also tried the same thing, and had the same result! Also, one capful in the toilet bowel will clean better than any toilet bowl cleaner ever hoped to!
Joe also tried ULTRA-ION™ GREEN on an oil stain on his garage floor where an auto had leaked. He sprayed the oil with the product, watched as it started to break the oil down, than wiped it easily away. (This floor is epoxy coated.)
Rolinda Harris, Hawaii - Said that there was a stain in the carpet at her Church, which was caused by a water leak in the ceiling, and that the stain was compounded by asbestos. She said that the carpet treatment had cleaned this area pretty well, but could not take all of the stain out. She put ULTRA-ION™ GREEN to the test – and it completely removed the stain!
Bob and Jackie Ward, Idaho - “Our neighbor could never get her socks completely clean (she gets them dirty by walking out into the garage). So, we sprayed the socks with ULTRA-ION™ GREEN, added 1 cap of product to the washing machine, and reported that those socks came out cleaner and whiter than they ever had.”
Sue Young, Baltimore, Maryland - Said the ULTRA-ION™ GREEN was awesome for pet stains. She has two new puppies, and when she cleans their “spots” she has found that this product not only cleans the area but also deodorizes, and the puppies do not return to soil the same spot. Sue reported the ULTRA-ION™ GREEN is also great for washing your dishes.
Reggie Wade, South Carolina - Made his friend very happy when he was able to remove mildew and ink from a table that no other product could clean.
The word is out! The new ULTRA-ION™ GREEN is AWESOME! Everyone loves it. Just like Rolinda said, “ULTRA-ION™ GREEN does not coat or cover up dirt, stains and odors. It thoroughly cleans anything it touches! The main thing to remember is that for 95% of everyone’s cleaning needs, 3 caps to 15 ounces or “regular” strength will do the job. For glass or stainless steel, recommend “light” strength which is diluted by one-half or 1½ caps to 15 ounces. For the occasional tough job – heavily soiled or greasy surfaces - our customers may need to use heavy strength (4 caps to 15 ounces).
Remember, ULTRA-ION™ GREEN can be used on any surface on which you would put water. No matter what test that we have put ULTRA-ION™ GREEN to, its performance is outstanding! Keep it simple and let the new ULTRA-ION™ GREEN open the door for you to introduce your customers to ALL of our original and innovative water-saving products.
We invite everyone to join us on any one of the DWG Support Calls that take place on a weekly basis. With many special guest speakers using the open mike forum it allows you to ask questions that will allow you to expand your DWG business. Whether it be a product call, how to make a proper 30 second demo or any one of a hundred other topics no question is off limits if it helps you grow your business. To find out more about all these weekly calls simply go to the main website at www.dwginternational.com and click on the “ONGOING TRAINING” link. There you will find out how you too can join us and learn.
|